Dell POWERCONNECT 5524P - Page 512

512 Dell PowerConnect 55xx Systems User Guide
Enabling Multicast Filtering and IGMP Snooping Using CLI Commands
The following table summarizes the CLI commands for enabling Multicast
Filtering and IGMP snooping as displayed on the Global Parameters page.
The following is an example of the CLI commands:
Table 16-1. Multicast Filtering and Snooping CLI Commands
CLI Command Description
bridge multicast filtering
no bridge multicast filtering
Enables filtering of Multicast addresses.
Use the no form of this command to
disable multicast address filtering.
ip igmp snooping
no ip igmp snooping
Enables Internet Group Membership
Protocol (IGMP) snooping.
Use the no form of this command to
disable IGMP snooping.
console(config)# bridge multicast filtering
console(config)# ip igmp snooping