Dell POWERCONNECT 5524P - Page 526

526 Dell PowerConnect 55xx Systems User Guide
The action for each port is displayed.
2 To modify the forwarding action for an interface, click Edit, and enter the
fields.
•
Interface — Select a port or LAG.
•
Unregistered Multicast — Select the forwarding status of the selected
interface. The possible options are:
•
Forwarding — Enables forwarding of unregistered Multicast
frames on the selected port or port-channel.
•
Filtering — Enables filtering of unregistered Multicast frames on
the selected VLAN interface.
Configuring Unregistered Multicast Using CLI Commands
The following table summarizes the CLI commands for configuring
Unregistered Multicast on the device:
The following is an example of the CLI commands:
Table 16-6. Unregistered Multicast CLI Commands
CLI Command Description
bridge multicast unregistered Configures the forwarding state of
unregistered multicast addresses.
show bridge multicast unregistered Displays the unregistered multicast
filtering configuration.
console # show bridge multicast unregistered
Port Unregistered
------- --------
gi1/0/1 Forward
gi1/0/2 Filter
gi1/0/3 Filter