Dell POWERCONNECT 5524P - Page 549

Dell PowerConnect 55xx Systems User Guide 549
– Device ID — Neighboring device ID
–
System Name — Name of the neighboring system
–
Port ID — Neighboring port ID
–
Capabilities — Neighboring device capabilities
2 Click Clear Neighbors Table to delete all the entries or select Remove to
delete a specific port entry.
3 Click the Details button of a port to display the Neighbors Information:
Details
page for that port.
In addition to the fields displayed in the
MED Port Settings: Details
Advertise Information
page and the Green Ethernet Configuration pages,
the following fields are displayed for the neighbors of the selected port:
–
Power Type — Port’s power type
–
Power Source — Port’s power source
–
Power Priority — Port’s power priority
–
Power Value — Port’s power value, in Watts
–
Hardware revision — Hardware revision
–
Firmware revision — Firmware revision
–
Software revision — Software revision
–
Serial number — Device serial number
–
Manufacturer name — Device manufacturer name
–
Model name — Device model name
–
Asset ID — Asset ID
Configuring LLDP Neighbors Using CLI Commands
The following commands are used to configure LLDP neighbors.
Table 17-5. LLDP Neighbors Information CLI Commands
CLI Command Description
show lldp neighbors
[gigabitethernet|tengigabite
thernet] port-number
Displays information about neighboring
devices discovered using LLDP