Dell POWERCONNECT 5524P - Page 631

Dell PowerConnect 55xx Systems User Guide 631
Defining Device Alarms Using the CLI Commands
The following table contains the CLI commands for defining device alarms.
Table 21-10. Device Alarm CLI Commands
CLI Command Description
rmon alarm index
MIB_Object_ID interval
rthreshold fthreshold
revent fevent [type type]
[startup direction] [owner
name]
no rmon alarm index
Configures RMON alarm conditions.
Use the no form of this command to
remove an alarm.
show rmon alarm-table Displays summary of the alarm table.
show rmon alarm number Displays the RMON alarm
configuration.