Dell POWERCONNECT 5524P

680 Dell PowerConnect 55xx Systems User Guide
Only those policies that are bound to an interface are active (see the Policy
Binding pages).
After a policy has been added, class maps can be added in the Policy Table
pages.
To create a QoS policy:
1
Click Quality of Service > QoS Advanced Mode > Policy Table to
display the
Policy Table: Summary page.
Figure 22-14. Policy Table: Summary
The previously-defined policies are displayed.
2 To create a policy, click Add .
3 Enter the name of the new policy in the Policy Name field.
4 Add class maps to the new policy in the Policy Class Maps page.