Dell PowerEdge M1000e - Page 100

cfgRacTuneHttpPort (Read or Write)
Description
To use HTTP network communication, specify the port number.
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, and 60106.
Default
80
cfgRacTuneHttpsPort (Read or Write)
Description
To use HTTPS network communication, specify the port number.
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123, 161, 546,
801, 4096, 5988, 5989, 6900, 9000, and 60106.
Default
443
cfgRacTuneIpRangeEnable (Read or Write)
Description
Enables or disables the IPv4 Address Range validation feature.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgRacTuneIpRangeAddr (Read or Write)
Description
Species the acceptable IPv4 address bit pattern in the positions of the "1"s in the range mask property
(cfgRacTuneIpRangeMask).
Alogin from the incoming IP address is allowed only if the following are identical:
• cfgRacTuneIpRangeMask bit-wise and with incoming IP address
•
cfgRacTuneIpRanbeMask bit-wise and with cfgRacTuneIpRangeAddr
Legal Values
An IPv4 address formatted string, for example, 192.168.0.
Default
192.168.0
cfgRacTuneIpRangeMask (Read or Write)
Description
Standard IP mask values with left-justied bits. For example, 255.255.255.0.
Login from the incoming IP address is allowed only if both of the following are identical:
• cfgRacTuneIpRangeMask bit-wise and with incoming IP address
100