Dell PowerEdge M1000e - Cfgoobsnmp

cfgSerialConsoleIdleTimeout=1800
cfgSerialConsoleNoAuth=0
cfgSerialConsoleCommand=
cfgSerialConsoleColumns=0
cfgSerialHistorySize=8192
cfgSerialTelnetEnable=0
cfgSerialSshEnable=1
cfgSerialTelnetEnable (Read or Write)
Description
Enables or disables the Telnet console interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgOobSnmp
This group contains parameters to congure the SNMP agent and trap capabilities of CMC. One instance of the group is allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2 and the Dell enterprise-specic the MIB.
Use this object with the cong or getcong subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
NOTE: You can congure a setting that does not have the hash sign (#) prexed in the output. To modify a congurable
object, use the —o option.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read or Write)
Description
Species the SNMP Community Name used for SNMP traps. The community string acts as a password shared
between dierent hosts over the network. This community string value must match with the other hosts for
any kind of communication through SNMP.
Legal Values
A string of up to 31 characters.
Default
public
Example
racadm getconfig -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpAgentCommunity=public
cfgOobSnmpAgentEnable (Read or Write)
Description
Enables or disables the SNMP agent in CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
97