Dell PowerEdge M1000e - Cfgchassispower

cfgLocationDataCenter (Read or Write)
Description
Indicates data center name.
Legal Values
String of up to 128 ASCII characters
Default
0
cfgLocationAisle (Read or Write)
Description
Indicates aisle where server is located.
Legal Values
String of up to 128 ASCII characters
Default
0
cfgLocationRack (Read or Write)
Description
Indicates rack where server is located.
Legal Values
String of up to 128 ASCII characters
Default
0
cfgLocationRackslot (Read or Write)
Description
Indicates slot where server is located.
Legal Values
Values 1–255 (1 Byte)
Default
0
cfgLocationDeviceSize (Read Only)
Description
Indicates server chassis size.
Legal Values
Values 1–255
Default
0
cfgChassisPower
This group contains parameters to display or congure power for the chassis.
Use this object with the cong or getcong subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
NOTE: You can congure a setting that does not have the hash sign (#) prexed in the output. To modify a congurable
object, use the -o option.
116