Dell PowerEdge M1000e - Cfgracsecurity

• 1 (Full Duplex)
Default
1
cfgNetTuningNicMtu (Read or Write)
Description
Indicated the maximum size of units in bytes transmitted by NIC.
Legal Values
576–1500
Default
1500
NOTE: IPv6 requires a minimum MTU of 1280. If IPv6 is enabled, and cfgNetTuningMtu is set to a lower value, the CMC
uses an MTU of 1280.
cfgRacSecurity
This group is used to congure settings related to CMC SSL certicate signing request (CSR) feature. The properties in this group
must be congured before generating a CSR. Use this object with the cong or getcong subcommands. To use this object property,
you must have the Chassis Conguration Administrator privilege.
For more information about generating certicate signing requests, see the subcommand sslcsrgen.
For the country code, go to the link http://www.iso.org/iso/country_codes/iso_3166_code_lists.htm
The following sections provide information about the objects in the cfgRacSecurity group.
cfgRacSecCsrCommonName (Read or Write)
Description
Species the CSR Common Name (CN) that must be an IP or CMC name as given in the certicate.
Legal Values
A string of up to 254 characters.
Default
<blank>
cfgRacSecCsrOrganizationName (Read or Write)
Description
Species the CSR Organization Name (O).
Legal Values
A string of up to 254 characters.
Default
<blank>
cfgRacSecCsrOrganizationUnit (Read or Write)
Description
Species the CSR Organization Unit (OU).
Legal Values
A string of up to 254 characters.
Default
<blank>
134