Dell PowerEdge M1000e - Ifconfig

NIC-Broadcom Gigabit
Ethernet BCM5720 - BC:
30:5B:97:06:C4
7.6.12 Reinstall
NIC-Broadcom Gigabit
Ethernet BCM5720 - BC:
30:5B:97:06:C4
7.6.12 2013-04-02
NIC-Broadcom Gigabit
Ethernet BCM5720 - BC:
30:5B:97:06:C6
7.6.6 Rollback
NIC-Broadcom Gigabit
Ethernet BCM5720 - BC:
30:5B:97:06:C6
7.6.12 Reinstall
NIC-Broadcom Gigabit
Ethernet BCM5720 - BC:
30:5B:97:06:C6
7.6.12 2013-04-02
NIC-PERC S110
Controller
3.0.0-0139 2012-10-11
RAID-PERC H310 Mini 20.10.1-0084 Reinstall
RAID-PERC H310 Mini 20.10.1-0084 Reinstall
RAID-PERC H310 Mini 20.10.1-0084 2012-02-09
BP12G+ 0:1 0.16 1999-12-31
racadm getversion -l -m server-1 -f bios
<
Server> <Component> <Version> <Install Date>
server-1 BIOS 1.6.0 2013-01-09
ifcong
Description
Displays the contents of the network interface table.
To use this subcommand, you must have the Administrator privilege.
Synopsis
racadm ifconfig
Input N/A
Example
$ racadm ifconfig
eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23
inet addr:10.35.155.136 Bcast:10.35.155.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2550665 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:272532097 (259.9 MiB) TX bytes:0 (0.0 B)
57