Dell PowerEdge M1000e - InfiniBand I;O Interoperability

Example
• Upload an invalid key to iDRAC User 2 in the rst key space using a string.
$ racadm sshpkauth -i 2 -k 1 -t "This is invalid key
Text"
ERROR: Key text appears to be corrupt
• Upload a valid key to iDRAC User 2 in the rst key space using a le.
$ racadm sshpkauth -i 2 -k 1 -f pkkey.key
Key file successfully uploaded.
• Get all keys for User 2 on iDRAC.
$ racadm sshpkauth -v -i 2 -k all
********************* User ID 2 ******************
Key ID 1:
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAzzy+k2npnKqVEXGXIzo0sbR6JgA5YNbWs3ekoxXV
fe3yJVpVc/5zrrr7XrwKbJAJTqSw8Dg3iR4n3vUaP+lPHmUv5Mn55Ea6LHUslAXFqXmOdlThd
wilU2VLw/iRH1ZymUFnut8ggbPQgqV2L8bsUaMqb5PooIIvV6hy4isCNJU=
1024-bit RSA, converted from OpenSSH by xx_xx@xx.xx
Key ID 2:
Key ID 3:
Key ID 4:
sslcertdownload
Description
Downloads an SSL certicate from CMC to the client’s le system.
To run this subcommand, you must have the Server Control privilege.
NOTE: This subcommand is only supported on the remote interface(s).
Synopsis
racadm sslcertdownload -f <filename> -t <type>
Input
• -f — Species the target lename on local le system to download the certicate.
• -t <type> — Species the type of certicate to download, either the CA certicate for Directory
Service or the server certicate.
– 1=server certicate
– 2=Active Directory
Output Returns 0 when successful and non-zero number when unsuccessful.
Example
• Download server certicate:
racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 1 -f cert.txt
• Download Active Directory certicate:
racadm -r 192.168.0 -u root -p xxx sslcertdownload -t 2 -f ad_cert.txt
NOTE: This command is not supported in the rmware RACADM interface as it is not a le system.
sslcertupload
Description
Uploads a custom SSL server or CA certicate for Directory Service from the client to CMC.
72