Dell PowerEdge M1000e - Cfgractuning; Cfgractuneenhancedlog (Read or Write)

cfgRacTuning
This group is used to congure various conguration properties, such as valid ports and security port restrictions.
Use this object with the cong or getcong subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
NOTE: You can congure a setting that does not have the hash sign (#) prexed in the output. To modify a congurable
object, use the
—o option.
The following sections provide information about the objects in the cfgRacTuning group.
NOTE: Only the following objects are displayed, if —m option is used:
• cfgRacTuneWebserverEnable
• cfgRacTuneHttpPort
• cfgRacTuneHttpsPort
• cfgRacTuneTelnetPort
• cfgRacTuneSshPort
cfgRacTuneRemoteRacadmEnable (Read or Write)
Description
Enables or disables the Remote RACADM interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
cfgRacTuneIdracDNSLaunchEnable (Read or Write)
Description
Congure iDRAC or CMC GUI launch using IP or DNS.
Legal Values
• 1 — Enabled (launch iDRAC or CMC using DNS name)
• 0 — Disabled (launch iDRAC or CMC using IP address)
Default
0 — Disabled
cfgRacTuneEnhancedLog (Read or Write)
Description
Enables or disables the enhanced chassis log feature.
Legal Values
• 1 — Enable
• 0 — Disable
Default 0
99