Dell PowerEdge M1000e - Cfguseradmin

cfgRhostsSyslogPowerLoggingInterval (Read or Write)
Description Species the power consumption collection/logging interval.
Legal Values
1–1440 (minutes)
Default
5
Example
racadm getconfig -g cfgRemoteHosts [-m server-<n>]
cfgRhostsFwUpdateTftpEnable=1
cfgRhostsFwUpdateIpAddr=0.0.0.0
cfgRhostsFwUpdatePath=
cfgRhostsSmtpServerIpAddr=localhost.localdomain
cfgRhostsNtpEnable=0
cfgRhostsNtpServer1=
cfgRhostsNtpServer2=
cfgRhostsNtpServer3=
cfgRhostsNtpMaxDist=16
cfgRhostsSyslogEnable=0
cfgRhostsSyslogPort=514
cfgRhostsSyslogServer1=
cfgRhostsSyslogServer2=
cfgRhostsSyslogServer3=cfgRhostsSyslogPowerLoggingEnabled=1
cfgRhostsSyslogPowerLoggingInterval=5
cfgUserAdmin
This group provides conguration information about the users allowed to access CMC through the available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the conguration for an individual user.
NOTE: In the current CMC rmware version, the objects cfgUserAdminEnable and cfgUserAdminPrivilege are
interrelated; changing the value of one property causes the value of the other property to change. For example, if a user
does not have login privilege, the user is disabled by default. When you enable the user by changing the value of the
UserAdminEnable to 1, the right-most digit of the UserAdminPrivilege also becomes 1. On the other hand, if you change
the right-most digit of the UserAdminPrivilege to 0, the value of the UserAdminEnable becomes 0.
Use this object with the cong or getcong subcommands. To use the command as follows: -i <index group>, supply an index
group number
To use this object property, you must have the Chassis Conguration Administrator privilege.
NOTE: You can congure a setting that does not have the hash sign (#) prexed in the output. To modify a congurable
object, use the —o option.
The following sections provide information about the objects in the cfgUserAdmin group.
cfgUserAdminIndex (Read Only)
Description
The unique index of a user.
The index number is used to specify a unique group name. Only valid for indexed groups.
Legal Values
The parameter species decimal integer 1–16.
Default
<index of the instance>
89