Dell PowerEdge M1000e - Getraclog

Input Power Allocated to Chassis
Infrastructure
= 1402 W
Total Input Power Available for Allocation = 13408 W
Standby Input Power Capacity = 0 W
getraclog
Description
The getraclog command displays CMC log entries.
Synopsis
• racadm getraclog [-i]
• racadm getraclog [-s <start>] [-c <count>] [--more]
NOTE: If options are not provided, the entire log is displayed.
Input
• -c — Species the number of records to display.
NOTE: On Remote RACADM, the number of logs are restricted to 25 by default.
• -i — Displays the number of entries in the CMC log.
• --more — Displays one screen at a time and prompts you to continue (similar to the UNIX more
command).
•
-s — Species the starting record used for the display.
NOTE: When Enhanced Chassis Logging and Events feature is enabled, then -i and --more options
are not displayed.
Example
• Display the starting record and the number of records.
racadm getraclog -s 10 -c 2
• Display a few records and prompt to display another set of records.
$ racadm getraclog --more
Dec 4 22:23:09 CMC-JP4BF2S Login success from 192.168.0 (username=root,
type=SSH, sid=16393)
Dec 4 22:24:54 CMC-JP4BF2S Login success from 192.168.0 (username=test,
type=SSH, sid=35885)
Dec 4 22:26:20 CMC-JP4BF2S Login success from 192.168.0 (username=root,
type=GUI, sid=27476)
Dec 4 22:28:06 CMC-JP4BF2S Mod password of user puser succeeds
Dec 4 22:28:06 CMC-JP4BF2S Mod privileges of user puser succeeds
Dec 4 22:28:21 CMC-JP4BF2S Login success from 192.168.0 (username=puser,
type=SSH, sid=39229)
Dec 4 22:29:12 CMC-JP4BF2S Mod password of user nuser succeeds
Dec 4 22:29:12 CMC-JP4BF2S Mod privileges of user nuser succeeds
Dec 4 22:29:51 CMC-JP4BF2S SSH login failed (username=nuser,
ip=192.168.0, reason=Local user fails to login )
Dec 4 22:30:23 CMC-JP4BF2S last message repeated 3 times
Dec 4 22:30:23 CMC-JP4BF2S Mod privileges of user nuser succeeds
Dec 4 22:30:38 CMC-JP4BF2S SSH login failed (username=nuser,
ip=192.168.0, reason=Local user fails to login )
[more]
• Entry in the RAC log when Extended Power Performance control is enabled or disabled.
racadm getraclog
Jul 31 14:16:11 CMC-4C2WXF1 Log Cleared
Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Enabled
Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Disabled
• When Enhanced Logging mode is enabled, the output of getraclog is displayed similar to chassislog
output.
49