Dell PowerEdge M1000e - Cfgremotehosts

Default
The current MAC address of NIC. For example, 00:12:67:52:51:A3.
cfgRemoteHosts
This group provides properties that allow conguration of the SMTP server for email alerts.
This group enables/disables and congures rmware updates, NTP, remote syslogging and SMTP email alerting.
Use this object with the cong or getcong subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
The following sections provide information about the objects in the cfgRemoteHosts group.
cfgRhostsFwUpdateTftpEnable (Read or Write)
Description
Enables or disables rmware update from a network TFTP server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
cfgRhostsFwUpdateIpAddr (Read or Write)
Description
Species the network TFTP server IPv4 or IPv6 address that is used for TFTP rmware update operations.
Legal Values
A string representing a valid IPv4 or IPv6 address. For example, 192.168.0.61
Default
For IPv4, it is 0.0.0.0
cfgRhostsFwUpdatePath (Read or Write)
Description
Species TFTP path where rmware image le exists on the TFTP server. The TFTP path is relative to the
TFTP root path on the TFTP server.
NOTE: The server may still require you to specify the drive (for example, C:).
Legal Values
A string with a maximum length of 255 ASCII characters.
Default
<blank>
cfgRhostsSmtpServerIpAddr (Read or Write)
Description
The IPv4 or IPv6 address of the network SMTP server.
The SMTP server transmits email alerts from CMC if the alerts are congured and enabled.
Legal Values
A string representing a valid SMTP server IPv4 or IPv6 address. For example: 192.168.0.
Default
localhost.localdomain
86