Dell PowerEdge M1000e - Page 87

cfgRhostsNtpEnable (Read or Write)
Description Enables or disables the use of the Network Time Protocol (NTP) for date and time synchronization.
Legal Values
• 1 — True
• 0 — False
Default
0
cfgRhostsNtpServer1 (Read or Write)
Description Species the rst of three possible NTP servers.
Legal Values
A string representing a valid NTP server. For example, ntp1.ntp.net. At least one NTP server must be specied
and duplicate entries are not allowed.
Default
Null
cfgRhostsNtpServer2 (Read or Write)
Description Species the second of three possible NTP servers.
Legal Values
A string representing a valid NTP server. For example, ntp2.ntp.net. At least one NTP server must be specied
and duplicate entries are not allowed.
Default
Null
cfgRhostsNtpServer3 (Read or Write)
Description
Species the third of three possible NTP servers.
Legal Values
A string representing a valid NTP server. For example, ntp3.ntp.net. At least one NTP server must be
specied and duplicate entries are not allowed.
Default
Null
cfgRhostsNtpMaxDist (Read or Write)
Description
Species the NTP maximum distance parameter used to aid in NTP conguration.
Legal Values
1–128
Default
16
cfgRhostsSyslogEnable (Read or Write)
Description
To allow the RAC and SEL logs to be written to up to three remote syslog servers Enables or disables remote
syslog.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
87