Dell PowerEdge M1000e - Gettracelog; Getversion

Chassis Midplane Version= 1.1
Power Status = ON
Example
• Display Chassis information
racadm getsysinfo -c
• Display CMC information
racadm getsysinfo -d
• Display IPv4 details without header
racadm getsysinfo -A
"CMC IPv4 Information:"
"1"
"192.168.0"
"192.168.0"
"255.255.255.0"
"1"
"192.168.0"
"0.0.0.0"
"1"
gettracelog
Description
Displays the CMC diagnostic trace log.
Synopsis
• racadm gettracelog [-i]
• racadm gettracelog [-s <start>] [-c <count>] [--more]
Input
• —i — Displays the number of entries in CMC trace log.
• --more — Displays one screen at a time and prompts the user to continue (similar to the UNIX more
command).
• -c — Species the number of records to display.
• -s — Species the starting record to display.
Output
The default output display shows the record number, timestamp, source and description. The timestamp begins
at midnight, January 1 and increases until the system starts. After the system starts, the system’s timestamp is
used.
Example
• Display entire log
racadm gettracelog
• Display number of records in log
racadm gettracelog -i
Total Records: 228
getversion
Description
Displays the current software version, model and generation information, and whether the target device can
be updated.
Synopsis
Example
• Displays the version for server 4.
racadm getversion -m server-4
55