Dell PowerEdge M1000e - M1000 e Enhanced Management

PWR 3 PS-3 Online OK
PWR 4 PS-4 Slot Empty N/A
PWR 5 PS-5 Failed OK
PWR 6 PS-6 Slot Empty N/A
<senType> <Num> <sensorName> <status>
Cable 1 IO-Cable OK
Cable 2 FPC-Cable OK
getslotname
Description
Displays the name and host name (if available) of all 16 slots, or of a specied slot (the slot number is indicated)
in the chassis. Optionally, this command can be used to nd if the slot name or host name is displayed in the
CMC User Interface or with the getslotname —i <slotNum> command. If the host name is not available,
the static slot name is used.
To use this subcommand, you must have the CMC Login User privilege.
Synopsis
• racadm getslotname
• racadm getslotname -i <slotNum>
• racadm getslotname -h <enabled>
Input
• racadm getslotname — Displays the slot name for all 16 slots in the chassis.
• -i <slotNum> — species the ID of the slot.
Legal values: 1–16
• -h <enabled> — Species whether to use the slot name or the host name (if available).
1= use host names, 0=use slotnames
Example
• Displays the slot name for all 16 slots in the chassis
racadm getslotname
<Slot #> <Slot Name> <Host name>
1 SLOT-01
2 Webserver01 WXP-8GRB221
3 Webserver3 WXP-319QWEecet5
4 SLOT-04
5 SLOT-05
6 SLOT-06
7 SLOT-07
8 SLOT-08
9 SLOT-09
10 SLOT-10
11 SLOT-11
12 SLOT-12
13 SLOT-13
14 SLOT-14
15 SLOT-15
16 SLOT-16
racadm getslotname -i 1
SLOT-01
52