Dell PowerEdge M1000e - Page 123

cfgChassisStandbyInPowerCapacity (Read Only)
Description
Indicates the amount of power (in watts) available for powering up any hardware modules that are either added
to the chassis or powered up (if they are already present in the chassis).
Legal Values
None
Default
None
cfgChassisPowerClear (Write Only)
Description
Resets cfgChassisMinPower and cfgChassisMaxPowerCapacity, when set to 1.
Legal Values
None
Default
None
cfgChassisPowerClearTimestamp (Read Only)
Description
Time stamp when cfgChassisMinPower and cfgChassisMaxPowerCapacity were reset.
Legal Values
None
Default
None
cfgChassisPowerButtonEnable (Read or Write)
Description
Indicates if the chassis power button is enabled or disabled.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default
None
cfgSystemEnergyConsumptionClear (Write Only)
Description
Resets energy statistics when set to 1.
Legal Values
None
Default
None
Examples
• racadm getconfig -g cfgChassisPower
# cfgChassisInPower=0 W | 0 BTU/hr
# cfgChassisPeakPower=0 W
# cfgChassisPeakPowerTimestamp=06:32:55 01/26/2009
# cfgChassisMinPower=0 W
# cfgChassisMinPowerTimestamp=06:32:55 01/26/2009
# cfgChassisPowerStatus=5
# cfgChassisRedundantState=0
cfgChassisPowerCap=16685 W
cfgChassisPowerCapF=16685 W
123