Table 6. Rear view of the system (continued)
Item Ports, panels, or
slots
Icon Description
NOTE: If the server stops responding during POST, press and hold
the System ID button for more than five seconds to enter the BIOS
progress mode
NOTE: To reset the iDRAC (if not disabled on the iDRAC setup page by
pressing F2 during system boot), press and hold the System ID button
for more than 15 seconds.
12 OCP NIC card blank N/A The optional OCP NIC card supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
13 NIC ports (optional) The NIC ports that are integrated on the LOM card provide network
connectivity which is connected to the system board.
14 Power supply unit
(PSU1)
PSU1 is the primary PSU of the system.
NOTE: For more information about the ports, see the Technical Specifications section.
14 DellPowerEdge R760xa system overview
To Next Page
Loading...
