Figure 123. Installing the BOSS-N1 module
6. Align the M.2 SSD at an angle with the BOSS-N1 card carrier.
7. Insert the M.2 SSD until it is firmly seated in the BOSS-N1 card carrier.
8. Using the Phillips #1 screwdriver, secure the M.2 SSD on the BOSS-N1 card carrier with the M3 x 0.5 x 4.5 mm screw.
Figure 124. Installing the M.2 SSD
9. Slide the BOSS-N1 card carrier into the BOSS-N1 module slot.
Installing and removing system components
153
To Next Page
Loading...
