Script Commands 153
Clear Virtual Disk Unreadable Sectors
This command clears the unreadable sector information from one or more
virtual disks.
Syntax
clear (allVirtualDisks | virtualDisk
[virtualDiskName] | virtualDisks [virtualDiskName1
... virtualDiskNameN]) unreadableSectors
Parameters
NOTE: You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.
Parameter Description
allVirtualDisks Clears unreadable sector information from all of the
virtual disks in the storage array.
virtualDisk or
virtualDisks
The name of the specific virtual disk for which you
want to clear unreadable sector information. You can
enter more than one virtual disk name. Enclose the
virtual disk name in square brackets ([ ]). If the
virtual disk name has special characters, you also
must enclose the virtual disk name in double
quotation marks (“ ”).
book.book Page 153 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
