Dell PowerVault MD3620f - Show Virtual Disk Copy Target Candidates; Show Virtual Disk Performance Statistics

Script Commands 291
Virtual Disk Name: engineering
Capacity: 4.0 GB
Disk Group: 2
Show Virtual Disk Copy Target Candidates
This command returns information about the candidate virtual disks that you
can use as the target for a virtual disk copy operation.
Syntax
show virtualDiskCopy source ["sourceName"]
targetCandidates
Parameters
Show Virtual Disk Performance Statistics
This command returns information about the performance of the virtual
disks in a storage array.
Syntax
show (allVirtualDisks | virtualDisk
[virtualDiskName]
virtualDisks [virtualDiskName1 ...
virtualDiskNameN]) performanceStats
Parameter Description
source Name of the source virtual disk for which you are trying to find a
candidate target virtual disk. You must put quotation marks (" ")
and brackets ([ ]) around the source virtual disk name. The source
virtual disk name and quotation marks must be inside the brackets.
book.book Page 291 Wednesday, June 8, 2011 12:20 PM