Dell PowerVault MD3620f User Manual

Script Commands 209
NOTE: If no optional parameters are specified, the recreate snapshot command
processes the specified snapshot virtual disks as a batch, provided a validation
check of all of the virtual disks runs successfully. If successful, the snapshots start
the re-creation process and all of the affected virtual disks (snapshot, source, and
repository) are quiesced until the process is complete.
NOTE: The Microsoft Virtual Shadow Copy Service (VSS) provider allows the
recreation of multiple snapshots simultaneously.
Remove Remote Replication
NOTE: This command valid only with Fibre Channel storage arrays.
This command removes the replication relationship between the primary
virtual disk and the secondary virtual disk in a remote replication pair.
Syntax
remove remoteReplication (localVirtualDisk
[virtualDiskName] |
localVirtualDisks [virtualDiskName1 ...
virtualDiskNameN])
Parameter
book.book Page 209 Wednesday, June 8, 2011 12:20 PM

Dell PowerVault MD3620f Specifications

General

Form Factor	2U
Drive Bays	24
Maximum Raw Capacity	96 TB
RAID Levels Supported	0, 1, 5, 6, 10, 50, 60
Cache per controller	2 GB
Management Software	Dell Storage Manager
Supported Drive Types	SAS, SATA
Host Interface	Fibre Channel
Controller	Dual controllers
Connectivity	8 Gb Fibre Channel, 6 Gb SAS
Expansion Enclosures	MD1200, MD1220
Host Connectivity	Fibre Channel
Cache Memory	2 GB
Operating Temperature	10°C to 35°C (50°F to 95°F)
Power Supply	Redundant Hot-swappable
Maximum Number of Hosts	64