166 Script Commands
Create RAID Virtual Disk (Free Capacity Base Select)
This command creates a virtual disk in the free space of a disk group.
Syntax
create virtualDisk diskGroup=[diskGroupName]
userLabel=”virtualDiskName”
[freeCapacityArea=freeCapacityIndexNumber
capacity=virtualDiskCapacity
owner=(0 | 1)cacheReadPrefetch=(TRUE | FALSE)
segmentSize=segmentSizeValue
usageHint=(fileSystem | dataBase | multiMedia)]
[dssPreAllocate=(TRUE | FALSE)
securityType=(none | capable | enabled)]
Parameters
Parameter Description
diskGroup Sequence number of the disk group in
which to create the new virtual disk.
(To determine the sequence numbers of
the disk groups in your storage array, enter
the show storageArray Profile command.)
userLabel Name for the new virtual disk. You must
put quotation marks (" ") around the new
virtual disk name.
NOTE: You can use any combination of
alphanumeric characters, hyphens, and
underscores for the names. Spaces are not
allowed. Command names can have a
maximum of 30 characters. If you exceed
the maximum character limit, replace
square brackets ([ ]) with angle brackets
(< >) to overcome this limitation.
book.book Page 166 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
