Dell PowerVault MD3620f - Repair Virtual Disk Consistency

212 Script Commands
NOTE: You must use the host and hostGroup parameters when specifying a
nonaccess virtual disk or an access virtual disk. The script engine ignores the
host
or hostGroup parameters when you use the allVirtualDisks or virtualDisks
parameters.
Repair Virtual Disk Consistency
This command repairs the consistency errors on a virtual disk.
Syntax
repair virtualDisk [virtualDiskName] consistency
consistencyErrorFile="filename"
[verbose=(TRUE | FALSE)]
Parameters
Parameter Description
virtualDisk Name of the specific virtual disk for which to repair
consistency. You must put brackets ([ ]) around the virtual
disk name. If the virtual disk name has special characters,
you must also put quotation marks (" ") around the virtual
disk name.
consistencyError
File
Name of the file that contains the consistency error
information you use to repair the errors. You must put
quotation marks (" ") around the file name.
verbose Captures progress details, such as percent complete, and
shows the progress detail information as virtual disk
consistency is being repaired. To capture progress details, set
this parameter to TRUE. To prevent capturing progress
details, set this parameter to FALSE.
book.book Page 212 Wednesday, June 8, 2011 12:20 PM