306 Script Commands
Stop Snapshot
This command stops a copy-on-write operation.
Syntax
stop snapshot (virtualDisk [virtualDiskName] |
virtualDisks [virtualDiskName1 ...
virtualDiskNameN])
Parameter
Stop Storage Array Blink
This command turns off the indicator lights on the storage array that were
turned on by the start storageArray blink command.
Syntax
stop storageArray blink
Parameters
None.
Parameter Description
virtualDisk
or
virtualDisks
Name of the virtual disk for which to start the formatting. You
must put brackets ([ ]) around the virtual disk name. If the
virtual disk name has special characters, you must also put
quotation marks (" ") around the virtual disk name.
book.book Page 306 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
