Dell PowerVault MD3620f - Show Virtualdiskcopy Sourcecandidates

290 Script Commands
Syntax
show virtualDiskCopy (allVirtualDisks |
source ["sourceName"] |
target ["targetName"])
Parameters
Show Virtual Disk Copy Source Candidates
This command returns information about the candidate virtual disks that you
can use as the source for a virtual disk copy operation.
Syntax
show virtualDiskCopy sourceCandidates
Parameters
None.
Additional Information
This command returns virtual disk copy source information as shown in this
example.
Virtual Disk Name: finance
Capacity: 4.0 GB
Disk Group: 1
Parameter Description
allVirtualDisks Returns information about virtual disk copy operations for all
virtual disk copy pairs.
source Name of the source virtual disk about which to retrieve
information. You must put quotation marks (" ") and
brackets ([ ]) around the source virtual disk name. The
source virtual disk name and quotation marks must be inside
the brackets.
target Name of the target virtual disk about which to retrieve
information. You must put quotation marks (" ") and
brackets ([ ]) around the target virtual disk name. The target
virtual disk name and quotation marks must be inside the
brackets.
book.book Page 290 Wednesday, June 8, 2011 12:20 PM