Dell PowerVault MD3620f - Delete Disk Group; Delete Host; Delete Host Group

186 Script Commands
Delete Disk Group
This command deletes an entire disk group and its associated virtual disks.
CAUTION: All data in the disk group is lost as soon as you run this command.
Syntax
delete diskGroup [diskGroupNumber]
Parameter
Delete Host
This command deletes a host.
Syntax
delete host [hostName]
Parameter
Delete Host Group
This command deletes a host group.
CAUTION: This command deletes all of the host definitions in the host group.
Parameter Description
diskGroup Number of the disk group to delete. You
must put brackets ([ ]) around the disk
group number.
Parameter Description
host Name of the host to delete. You must put brackets ([ ]) around the
host name. If the host name has special characters, you must also put
quotation marks (" ") around the host name.
NOTE: A host is a system that is attached to the storage array and
accesses the virtual disks on the storage array through its HBA
host ports.
book.book Page 186 Wednesday, June 8, 2011 12:20 PM