Script Commands 165
enclosureLossProtect Specifies that enclosure loss protection is
enforced when creating the disk group.
To enforce enclosure loss protection, set
this parameter to TRUE. The default
setting is FALSE. For information about
the enclosureLossProtect parameter, see
"Enclosure Loss Protection" on page 54.
dssPreAllocate The setting to make sure that reserve
capacity is allocated for future segment
size increases. The default value is TRUE.
securityType The setting to specify the security level
when creating the disk groups and all
associated virtual disks.
•
none
—The disk group and virtual disks
are not secure.
•
capable
—The disk group and virtual
disks are capable of having security set,
but security has not been enabled.
•
enabled
—The disk group and virtual
disks have security enabled.
For information about securityType, see
"Security Type" on page 158.
Parameter Description
book.book Page 165 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
