Dell PowerVault MD3620f - Page 273

Script Commands 273
– Capacity
– Data transfer rate
–Product ID
–Firmware level
• Physical disk channel information:
– Enclosure location and slot location
– Preferred channel
– Redundant channel
• Hot spare coverage
• Details for each physical disk
Depending on the size of the storage array, this information can be several
pages long. The physical disk information is also returned when you issue the
show storageArray profile command.
Syntax
show (allPhysicalDisks
[driveMediaType=(HDD | SSD | unknown | allMedia)]
|[physicalDiskType=(SAS)]) | (physicalDisk
[enclosureID,slotID] | physicalDisks
[enclosureID1,slotID1 enclosureID2,slotID2 ...
enclosureIDn,slotIDn])
summary
book.book Page 273 Wednesday, June 8, 2011 12:20 PM