Script Commands 309
NOTE: If the writeConsistency parameter is set to TRUE, the virtual disks
must be in a write-consistency group (or groups). This command suspends all
write-consistency groups that contain the virtual disks. For example, if virtual disks
A, B, and C are in a write-consistency group and they have remote counterparts A’,
B’, and C’, the command:
suspend remoteReplication virtualDisk [“A”]
writeConsistency=TRUE
suspends A-A’, B-B’, and C-C’. If you have a write-consistency group 1={A, B, C} and
write-consistency group 2={D, E, F}, the command:
suspend remoteReplication virtualDisks [“A” “D”]
writeConsistency=TRUE
suspends both write-consistency groups.
writeConsistency This parameter defines whether the virtual disks
identified in this command are in a write-
consistency group or are separate. For the virtual
disks in the same write-consistency group, set this
parameter to TRUE. For the virtual disks that are
separate, set this parameter to FALSE.
book.book Page 309 Wednesday, June 8, 2011 12:20 PM
To Next Page
Loading...
