Table 3. Boot configuration (continued)
Option Description
Secure Boot
Secure Boot helps ensure your system boots using only
validated boot software.
Enable Secure Boot—By default, this option is disabled.
NOTE: The system has to be in UEFI boot mode to enable
Enable Secure Boot.
Secure Boot Mode
Changes to the Secure Boot operation mode modifies the
behavior of Secure Boot to allow evaluation of UEFI driver
signatures.
The options are:
● Deployed Mode—By default, this option is enabled.
● Audit Mode
Expert Key Management
Allows you to enable or disable Expert Key Management.
Enable Custom Mode—By default, this option is disabled.
The Custom Mode Key Management options are:
● PK—By default, this option is enabled.
● KEK
● db
● dbx
Integrated Devices
Table 4. Integrated device options
Option Description
Date/Time
Allows you to set the date and time. The change to the system
date and time takes effect immediately.
Camera
Allows you to enable or disable camera.
Enable Camera - This option is enabled by default.
Audio
Allows you to turn off all integrated audio. By default, the Enable
Audio option is selected.
Allows you to enable or disable the integrated audio or microphone
and speaker separately. By default, the Enable Audio option is
selected.
The options are:
● Enable Microphone
● Enable Internal Speaker
USB Configuration
Allows you to enable or disable the internal or integrated USB
configuration.
The options are:
● Enable USB Boot Support
● Enable External USB Port
By default, all the options are enabled.
Disable USB4 PCIE Tunneling
By default the Disable USB4 PCIE Tunneling is disabled.
System setup 67
To Next Page
Loading...
