Delta AHCPU560-EN2 Series - Page 71

Chapter 5 Programming
5-11
5_
Number
Name
Description

Identifier
User can create a name for the Comsumed TAG in the PLC; up to 40
characters can be used.

Address
The address is corresponding to the registers or bits in the PLC; selections
are data register and M bits.

Type
The data type BOOL, WORD, DWORD, INT, DINT, REAL, and ARRAY are
supported. One-dimensional array is supported; up to 512 bye can be
used.

Initial Value
None

Comment
Descriptions can be added to describe the TAG; up to 128 characters are
supported.