DEMA CPM 310 G User Manual

- 5 -
6.4.4.1. Protection Settings p.149
6.4.4.1.1. Phase Protection Settings p.151
6.4.4.1.2. Earth Protection Settings p.152
6.4.4.1.3. Broken Conductor Protection Settings p.153
6.4.4.1.4. Negative Sequence Protection Settings p.154
6.4.4.1.5. Thermal (Overload) Protection Settings p.155
6.4.4.2. CT Settings p.156
6.4.4.3. System Settings p.157
6.4.4.4. Automatic Control Settings p.158
6.4.4.4.1. Input Settings p.159
6.4.4.4.2. (Auxiliary) Timer Settings p.160
6.4.4.4.3. Output Relay Settings p.161
6.4.4.4.4. Trip Settings p.162
6.4.4.4.5. Blocking (Logic) Selectivity Settings p.163
6.4.4.4.6. CB Failure Settings p.164
6.4.4.4.7. Delaying (Logic) Selectivity Settings p.165
6.4.4.4.8. Auto Recloser Settings p.166
6.4.4.4.9. Cold Load Pickup Settings p.168
6.4.4.4.10. CB Supervision Settings p.169
6.4.4.4.11. (Programmable) LED Settings p.170
6.4.4.4.12. Latch Settings p.171
6.4.4.4.13. Alarm Settings p.172
6.4.4.5. Communication Settings p.173
6.4.5. Buffer Menu p.174
6.4.6. Disturbance (Waveform) Records Menu p.180
7. Application Diagrams p.189
7.1. On the Use of Application Diagrams p.190
7.2. Sample Application p.190
7.3. Fundamental Cabling Diagram p.193
7.4. Application Diagram No. 1 p.194
7.5. Application Diagram No. 2 p.195
7.6. Application Diagram No. 3 p.196
7.7. Application Diagram No. 4 p.197
7.8. Application Diagram No. 5 p.198
7.9. Application Diagram No. 6 p.199
7.10. Application Diagram No. 7 p.200
7.11. Application Diagram No. 8 p.201
7.12. Application Diagram No. 9 p.202
7.13. Application Diagram No. 10 p.203
8. Technical Diagrams p.204
8.1. USB Connection Cable p.205
8.2. Technical Drawings p.206
8.3. Technical Specifications p.207
8.4. Default Settings p.214
8.5. Type Tests p.218
8.6. Ordering Codes p.219
9. Glossary p.220

DEMA CPM 310 G Specifications

General

Brand	DEMA
Model	CPM 310 G
Category	Relays
Language	English