EasyManua.ls Logo

DEMAG DC-Com 5 User Manual

DEMAG DC-Com 5
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background image
The relevant local accident prevention regulations for the application and general safety instructions must also be
complied with.
The following symbols and instructions warn against possible personal injuries or damage to property and are in
tended to assist you in your work.
DANGER
This symbol indicates an immediate hazard which can result in serious injury or death.
Follow these instructions at all times and be particularly careful and cautious.
WARNING
This symbol indicates a possibly hazardous situation which might result in serious injury or death.
Follow these instructions at all times and be particularly careful and cautious.
CAUTION
This symbol indicates a possibly hazardous situation which might result in medium to light injury or damage.
Follow these instructions at all times and be particularly careful and cautious.
Operating hazard for the machine
This symbol indicates information on the appropriate use of the machine.
This symbol in the operating instructions indicates all warnings which, if not complied with, may result in mal‐
functions or damage.
1.4 Information on the operating instructions
These operating instructions are an integral part of the machine. They describe the safe and appropriate use of the
machine.
These operating instructions are designed to provide the owner and operator with useful instructions for transpor‐
tation, putting into service, operation and maintenance of our chain hoists.
Persons entrusted with this work must know and comply with the safety regulations and the operating instructions.
The machine may only be operated by personnel who are fully familiar with the operating instructions. In particular,
this includes the "Safety" chapter and the relevant safety instructions in the working sections of these operating
instructions. The operating instructions must be available to the operating personnel at all times in order to prevent
operating errors and to ensure smooth and trouble-free operation of our products. They must be kept available in
the immediate vicinity.
1.5 Liability and warranty
All information included in these operating instructions has been compiled on the basis of the relevant regulations,
state-of-the-art engineering principles and our many years of experience.
These operating instructions must be read carefully before starting any work on and with the chain hoist, especially
before it is put into service for the first time. The manufacturer does not assume any liability for damage resulting
from the following:
non-compliance with the operating instructions,
inappropriate use,
untrained personnel,
unauthorized conversions,
technical modifications.
Wearing parts are not subject to liability for defects.
8
21480244/181209

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the DEMAG DC-Com 5 and is the answer not in the manual?

DEMAG DC-Com 5 Specifications

General IconGeneral
TypeElectric Chain Hoist
Load Capacity500 kg
Safe Working Load500 kg
Control TypePendant control
Protection ClassIP55
Chain Falls1
Frequency50 Hz
Power Supply400 V / 50 Hz
MotorThree-phase motor
Control24 V low voltage control
Chain Diameter5 mm

Summary

2 Safety

2.4 Hazards which may be caused by the machine

Identifies potential dangers and risks associated with operation.

2.8 Emergency stop device

Details the function and location of the emergency stop.

6 Putting into service for the first time

6.1 Safety instructions when first putting the unit into service

Essential safety for initial commissioning.

7 Operation

7.1 Safety instructions for operation

Mandatory safety rules for operating the hoist.

7.4 Emergency stop

Procedure for using and understanding the emergency stop.

8 Maintenance/repair

8.1 Safety Instructions for maintenance/repair

Critical safety guidelines for all maintenance tasks.

8.4 Inspection and maintenance schedule

Comprehensive table of required checks and intervals.

9 Faults / Warnings

9.1 Safety instructions for faults / warnings

Safety guidelines for fault handling.

Related product manuals