8.5.5.5 Scope of supply chain set
On reaching the permissible limit of chain wear the chain set must be replaced (for determining the wear limit of the
chain, ⇒ "Checking the hoist chain", Page 79.
When a new RDC standard chain is ordered, a chain set is always supplied.
The chain set includes the following parts:
●Chain,
● Sprocket wheel,
● Chain guide with plate and cap,
● Chain guide plate,
● Buffers for upper and lower hook position,
● Demag chain grease tube,
● Retaining ring.
The chain guide is pre-assembled, the chain is already fitted in the chain guide.
82
21480244/181209
To Next Page
Loading...
Need help?
General
