EasyManuals Logo

DEMAG DC-Com 5 User Manual

DEMAG DC-Com 5
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
7 Operation
7.1 Safety instructions for operation
WARNING
Inappropriate operation
There is a risk of injury in the case of inappropriate operation.
Inappropriate operation may result in serious personal injury and / or material damage. The unit may only be
operated by authorized, instructed personnel in compliance with all accident prevention and safety regulations.
National regulations for the use of crane and lifting equipment must be observed and complied with.
The customer must arrange for the training of the operating personnel.
WARNING
Crushing hazard
When lifting or lowering loads there is a risk of injury due to parts of the body being crushed or clothing or hair
becoming entangled.
Do not touch the chain.
Do not reach into the upper or lower chain entry point.
Do not reach into the coupling area when changing the quick-release coupling of the Manulift.
Do not reach between hook throat and load handling attachment when lifting loads.
Persons must not stay in the immediate danger zone when depositing the load.
WARNING
Risk of burning
There is a risk of burning when touching the chain hoist during operation.
Do not touch the hot motor housing.
WARNING
Suspended load! Falling parts!
There is danger to life and limb, when suspended loads fall down.
Persons must keep out of the danger zone.
Keep a sufficient safety distance.
Do not walk under the suspended load.
It is not allowed to lift loads above persons.
Wear protective clothing!
WARNING
Non-compliance with operating regulations / regulations regarding industrial safety
There is a danger to life and limb due to the non-compliance with valid standards.
Machines may only be operated in compliance with the country-specific operating regulations, e.g. Cranes BGV
D6 (VBG 9) in Germany.
If required, apply a copy of the relevant operating regulations, ident. no. 206 093 44, at a suitable place where
operators can read them at any time (e.g. at the mains connection switch).
The machine must not be put into operation or must be taken out of service immediately if any defects or irregularities
relating to operating safety and reliability or function are detected.
Safety devices must not be rendered inoperative or modified in contradiction to their intended use.
21480244/181209
61

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DEMAG DC-Com 5 and is the answer not in the manual?

DEMAG DC-Com 5 Specifications

General IconGeneral
BrandDEMAG
ModelDC-Com 5
CategoryChain Hoists
LanguageEnglish

Related product manuals