Qualified electrician
Qualified electricians are defined as persons who, owing to their technical training, knowledge and experience of
electrical installations as well as knowledge of the relevant valid standards, codes of practice and regulations, are
able to assess the tasks given to them and to identify and eliminate potential hazards. The person must be trained
by the owner in accordance with the tasks to be performed.
Experienced technician
Experienced technicians are defined as persons who, owing to their technical training and experience, have sufficient
knowledge in the field of the machine. They must be familiar with the relevant national industrial safety regulations,
codes of practice, accident prevention regulations, directives and generally accepted engineering standards enabling
them to judge the safe operating condition of machines.
Assigned expert engineer (in the Federal Republic of Germany according to BGV D8, § 23, for determining the
S.W.P.)
An assigned expert engineer is defined as an experienced technician specifically assigned by the manufacturer to
determine the remaining duration of service (S.W.P. = safe working period) and to carry out a general overhaul of
machines.
Authorized expert engineer (according to BGV D6, § 28 in Germany)
In addition to the expert engineers of the Technical Supervisory and Inspection Board, an authorized expert engineer
for the inspection of machines is defined as an expert engineer authorized by the Industrial Employers’ Mutual
Insurance Association.
1.9 Test and inspection booklet
A test and inspection booklet filled in with all details must be available for the hoist (in the Federal Repblic of Germany
according to BGV D6, § 28). The results of the regular tests and inspections must be entered into the test and
inspection booklet and must be certified by the inspector. Test and inspection booklet ident. no.: ⇒ Tab. 3, Page
7
1.10 After-sales service
Our after-sales service will provide you with technical information on our products, etc.
Please keep the serial or order number (see test and inspection booklet, load capacity plate on the crane) for any
correspondence or spare part orders. Specifying these data ensures that you receive the correct information or the
required spare parts.
Demag Cranes & Components GmbH
Telefon +49 (0)180 / 5 - 741268
www.demagcranes.com
10
21480244/181209
To Next Page
Loading...
Need help?
General
