Denon AVR-4311CI User Manual

129
Basic versionSimple version Advanced version Information
Surround
n Types of input signals, and corresponding surround modes
This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode.
Symbols in the table
F This indicates the default surround mode.
D This indicates the surround mode that is fixed when “AFDM” (vpage87) is set to “ON”.
S This indicates the selectable surround mode.
Surround mode (vpage50)
NOTE
Input signal types and formats
ANALOG
PCM
(multi ch)
PCM
(2ch)
WMA/
MP3/
MPEG-4
AAC/FLAC/
WAV
DTS-HD
DTS-HD
LBR
DTS DOLBY DOLBY DIGITAL Super Audio CD
DTS-HD
Master
Audio
DTS-HD
High
Resolution
Audio
DTS
EXPRESS
DTS ES
DSCRT
(With Flag)
DTS ES
MTRX
(With Flag)
DTS
(5.1ch)
DTS 96/24
DOLBY
TrueHD
DOLBY
DIGITAL
Plus
DOLBY
DIGITAL EX
(With Flag)
DOLBY
DIGITAL EX
(With no
Flag)
DOLBY
DIGITAL
(5.1ch)
DOLBY
DIGITAL
(2ch)
DSD
(multi ch)
DSD
(2ch)
DTS SURROUND
DTS-HD MSTR
z4 F
DTS-HD HI RES
z4 F
DTS ES DSCRT6.1
z1z4 F D
DTS ES MTRX6.1
z1z4 F D
DTS SURROUND
z4 S S F
DTS 96/24
z4 F
DTS (–HD) + PLgx CINEMA z2z4 S S S S S S S
DTS (–HD) + PLgx MUSIC z1z4 S S S S S S S
DTS (–HD) + PLgz z3 S S S S S S S
DTS EXPRESS
z4 F
DTS (–HD) + NEO:6
z1z4 S S S S S S
DTS NEO:6 CINEMA
z5 S S S S S
DTS NEO:6 MUSIC
z5 S S S S S
DTS NEO:6 CINEMA A-DSX
z6 S S S S S
DTS NEO:6 MUSIC A-DSX
z6 S S S S S
Audyssey DSX
z6 S S S S S S S
DOLBY SURROUND
DOLBY TrueHD
z4 F
DOLBY DIGITAL+
z4 F
DOLBY DIGITAL EX
z1z4 S S S
DOLBY (D+) (HD) +EX
z1z4 S S
DOLBY DIGITAL
z4 S F F
DOLBY (D) (D+) (HD) +PLgx
CINEMA
z2z4 S S F D S S
DOLBY (D) (D+) (HD) +PLgx
MUSIC
z1z4 S S S S S
DOLBY (D) (D+) (HD) +PLgz z3 S S S S S
DOLBY PRO LOGIC gx CINEMA z1 S S S S S
DOLBY PRO LOGIC gx MUSIC z1 S S S S S
DOLBY PRO LOGIC gx GAME z1 S S S S S
DOLBY PRO LOGIC gz z3 S S S S S
z1 If “Speaker Config.” – “Surround Back” (vpage96) is set to “None”, this surround mode cannot be selected.
z2 If “Speaker Config.” – “Surround Back” (vpage96) is set to “1 spkr” or “None”, this surround mode cannot
be selected.
z3 If “Speaker Config.” – “Front Height” (vpage96) is set to “None”, this surround mode cannot be selected.
z4 The same was when “Audyssey DSX™” (vpage90) setting is set to “ON”.
z5 If “Speaker Config.” – “Center” and “Surround” is set to “None” or headphones are used, this surround mode cannot
be selected.
z6 If “Speaker Config.” – “Front Height”, “Front Wide” and “Center” is set to “None” or headphones are used, this
surround mode cannot be selected.
1.AVR4311CIEU_ENG_108.indd 129 2010/08/30 20:11:17

Denon AVR-4311CI Specifications

General

Brand	Denon
Model	AVR-4311CI
Category	Stereo Receiver
Language	English