56
Connect
• For the method of connecting 7.1-channel speakers, see page 5.
• For the method of connecting the TV, see page 6.
7.2- or 9.2-channnel (Surround back / Front height /
Front wide speaker) connection
The illustration on the right shows a connection example for performing
7.2-channel or 9.2-channel playback using the surround back, front
height, or front wide speakers.
If you connect the surround back, front height, and front wide speakers
before you start playback, the audio is played back by automatically
switching the speakers in accordance with the surround mode or input
signals.
To set the speakers for automatic switching, select “Amp Assign”
and set “Assign Mode” to “NORMAL” using steps 3 and 4 of “Set up
“Amp Assign”” (vpage63).
n For connecting two subwoofers
Two subwoofers can be connected to this unit.
To use two subwoofers, set “Subwoofer” to “2 spkrs” using the
“Speaker Config.” setting (vpage95).
For speaker impedance and speaker cable connections, see page 5.
FL
FR
C
SBL SBR
SL
SR
FWR
FWL
FHR
FHL
SW1 SW2
1.AVR4311CIEU_ENG_108.indd 56 2010/08/30 20:10:46
To Next Page
Loading...
