Denon AVR-4311CI - Input Assign

82
Input Assign
Examples of input assign menu screen displays
This screen appears when the “SOURCE SELECT” – “each input source” – “Input Assign” menu is
selected. Use the “Input Assign” menu to change the w HDMI input connectors, e Digital input
connectors, and r component input connectors that are assigned to the q input sources in default
settings.
HDMI1
HDMI2
None
HDMI3
HDMI4
HDMI5
HDMI7
None
COAX1
OPT1
COAX2
OPT2
None
None
None
1-RCA
None
2-RCA
3-RCA
None
None
INPUT ASSIGN [1/2]
Default
Change HDMI input connector assignment
HDMI DIGITAL COMP
RETURN
EnterSelect Return
BD
DVD
TV
SAT/CBL
DVR
GAME
V.AUX
q
ew r
Input assignments menu operations
1
Use uio p to move the highlight to the item you want to set.
2
Press ENTER, then use o p to select the input connector to be
assigned.
3
Press ENTER to register the setting.
NOTE
If all “HDMI”, “DIGITAL” and “COMP” assignment of the Game source are set to “None”, Game source
cannot be selected with the input source selection.
SOURCE SELECT
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confi rm the setting Return to previous menu
Setting items Setting details
HDMI
Set this to change the HDMI
input connectors assigned
to the input sources.
BD DVD TV
SAT/CBL DVR
GAME V.AUX DOCK
HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 / HDMI 7
None : Do not assign an HDMI input connector to the selected input
source.
• At time of purchase, the settings of the different input sources are as
shown below.
Input
source
BD DVD TV
SAT/
CBL
DVR GAME V.AUX
DOCK
Default
setting
HDMI
1
HDMI
2
None
HDMI
3
HDMI
4
HDMI
5
HDMI
7
HDMI
6
• An input source to which an HDMI input connector cannot be assigned
is displayed as “– – –”.
• To play the video signal assigned at “HDMI” combined with the audio
signal assigned at “Input Assign“ – “Digital”, select “Digital” at “Input
Mode” (vpage84).
• The audio signals input from the analog and digital connectors are not
output to the monitor.
• When a control dock for iPod is connected, signals cannot be assigned
to the HDMI connectors.
• When “HDMI Control” – “Control” (vpage99) is set to “ON”, HDMI
input connector cannot be assigned to “TV”.
DIGITAL
Set this to change the digital
input connectors assigned
to the input sources.
BD DVD TV
SAT/CBL DVR
GAME V.AUX DOCK
CD SIRIUS
COAX (coaxial) 1 – 2 / OPT (optical) 1 – 2 / D.LINK (DENON LINK)z
None : Do not assign a digital input connector to the selected input source.
z “D.LINK” is set when this unit is connected by DENON LINK to a
DENON Blu-ray disc / DVD player (vpage25 “Component equipped
with a DENON LINK connector”).
• For setting DENON LINK 4th, see page 29.
• At time of purchase, the settings of the different input sources are as
shown below.
Input source BD DVD TV
SAT/
CBL
DVR
Default
setting
None
COAX
1
OPT
1
COAX
2
OPT
2
Input source GAME V.AUX
DOCK
CD
SIRIUS
Default
setting
None None None None None
1.AVR4311CIEU_ENG_108.indd 82 2010/08/30 20:11:03