Denon AVR-4311CI - Simple Version (Simple Setup Guide)

Simple
version
4
Simple version (Simple setup guide)
Here, we explain the entire setup procedure, from unboxing the unit to using it in a home theater.
The “Simple version” section provides the speaker installation, connection, and setup methods for the 7.1-channel system with surround
back speakers. For the installing, connecting, and setup methods of speakers other than the 7.1-channel system (with surround back
speakers), see page 54.
n Before connecting the unit, turn off the power to all devices.
n For operation of the connected devices, refer to the user manuals for each device.
Play back
disc
(vpage13)
Enjoy Blu-ray Disc in
surround sound.
5
Set up
speakers
(vpage7)
Use the setup microphone
(DM-A409) included
with the product, for
automatic setup.
4
Finish
STEP 6
Store
STEP 5
Check
STEP 4
Calculation
STEP 3
Measurement
(2nd – 8th listening position)
STEP 2
Detection &
Measurement
(Main listening position)
STEP 1
Preparation
Set up speakers (Audyssey
®
Auto Setup)
Turn on
power
(vpage7)
3
Connect
(vpage5)
Connect 7.1-channel
speakers, a TV and
Blu-ray Disc player
equipped with an HDMI
connector.
2
Install
(vpage5)
Enjoy better audio, using
the correct install method.
1
1.AVR4311CIEU_ENG_108.indd 4 2010/08/30 20:10:20