Denon AVR-4311CI - Playback (Basic Operation); Important Information; Adjusting the Master Volume; Selecting the Input Source

28
Playback (Basic operation)
n Playing a Blu-ray Disc player/DVD player
(vpage29)
n Playing a CD player (vpage30)
n Playing an iPod
®
(vpage30)
n Tuning in radio stations (vpage33)
n Playing a network audio (vpage37)
n Playing a USB memory device (vpage48)
Selecting a listening mode (Surround Mode)
(vpage50)
n Selecting the input source (vpage28)
n Adjusting the master volume (vpage28)
n Turning off the sound temporarily (vpage29)
Playback (Advanced operation) (vpage65)
Important information
Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.
Selecting the input source
Press the input source select button
(NET/USB, iPod, DVD, BD,
TUNER/DTU, DOCK, SAT TU,
SAT/CBL, GAME, V.AUX, PHONO,
CD, DVR, TV) to be played back.
The desired input source can be selected
directly.
Display the selected input source name on
the remote control unit.
• When iPod PLAY is pressed, the input source of this unit is
switched to “DOCK” or “NET/USB” and the connected iPod is
automatically played (vpage33 “iPod play function”).
You can also use the following operation to select an input
source.
n Using the “SOURCE SELECT” menu
Switch the main remote control unit to the
M
(MAIN ZONE) mode
when performing this operation (vpage108 “Operating the main
remote control unit”).
If the main remote control unit is in “ZONE2”or “ZONE3” mode,
the “SOURCE SELECT” menu will not be displayed when
SOURCE
SELECT
is pressed.
q Press SOURCE SELECT.
Display the “SOURCE SELECT” menu.
SOURCE SELECT
Source
SAT/CBL
Recent
Player
Video
Network
Tuner
Enter
Move
The currently selected input
source is highlighted.
q
w
e
q Input Source
The name of the highlighted input source is displayed.
w Recently used sources
The recently used input sources (up to fi ve) are displayed.
e Icons for the input sources in the different categories are
displayed.
w Use uio p to select the input source,
then press ENTER.
The input source is set and the source
selection menu is turned off.
• When using with an iPod connected directly to the USB port of this
unit, select “ (USB/iPod)” for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vpage104).
• To turn off the source selection menu without selecting an input
source, press SOURCE SELECT again.
• When SOURCE SELECT is pressed, the AMP-operation mode starts
automatically (vpage108).
n Using the knob on the main unit
Turn SOURCE SELECT.
• If “Rec Select” or “Tuning Preset”
mode is selected for the input
source, press SOURCE before
turning SOURCE SELECT.
• Turning SOURCE SELECT switches
the input source, as shown below.
BD DVD TV SAT/CBL GAMEDVR V.AUX
PHONO HD Radio SIRIUS NET/USB DOCKCD
Adjusting the master volume
Use VOL df to adjust the volume.
n When the “Volume Display” setting
(vpage104) is “Relative”
GAdjustable rangeH
– – –
–80.5dB – 18.0dB
n When the “Volume Display” setting (vpage104) is
“Absolute”
GAdjustable rangeH
0.0 – 99.0
• The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit.
In this case, perform the following
operations.
Turn MASTER VOLUME to adjust the
volume.
1.AVR4311CIEU_ENG_108.indd 28 2010/08/30 20:10:34