60
Connect
Multi-channel + 2-channel with
Bi-Amp connection
You can connect the other front speakers for
2-channel playback using DIRECT mode or STEREO
mode via the bi-amp connection.
The speakers used exclusively for multichannel
playback and the speakers exclusively used for
2-channel playback are automatically switched for
playback in accordance with the surround mode.
To set the speakers for automatic switching during
playback via the bi-amp connection, select “Amp
Assign” and set “Assign Mode” to “2CH Bi-AMP”
using steps 3 and 4 of “Set up “Amp Assign””
(vpage63).
z Bi-Amp connection
FR
FR’
FL’
FL
C
SBL SBR
SL
SR
SW
Multi channel playback
(Surround mode)
2-channel playback
(Direct/Stereo mode)
Switching
For speaker impedance and speaker cable connections, see page 5.
FR’
FL’
wq
wq
1.AVR4311CIEU_ENG_108.indd 60 2010/08/30 20:10:51
To Next Page
Loading...
Need help?
General
