Name: Denon AVR-X1000
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

142

Appendix

TipsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Settings

Select “Store” and then press ENTER.

Save the measurement results.

Audyssey Setup

Check processing result.

To proceed, select “Store”.

Speaker Config.

Distances

Levels

Crossovers

Store

•Saving the results requires about 20 seconds.

NOTE

•During saving of measurement results, be sure not to turn o the power.

Unplug the Setup and measurement microphone from

the unit’s SETUP MIC jack.

Set Audyssey Dynamic Volume

Audyssey Setup

You can set Dynamic Volume function,

which automatically adjusts volume level

for all content.

Do you want to enable?

Yes

•This feature adjusts the output volume to the optimal level while

constantly monitoring the level of the audio input to the unit.

Optimal volume control is performed automatically without any

loss in the dynamism and clarity of the sound when, for example,

the volume suddenly increases for commercials shown during

television programs.

NOTE

•After performing Audyssey® Setup, do not change the speaker connections or

subwoofer volume. In event of a change, perform Audyssey® Setup again.

Other manuals for Denon AVR-X1000

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-X1000 and is the answer not in the manual?

General

Receiver type	-
Frequency range	10 - 100000 Hz
Pre-out channels	1 SW
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Composite video in	2
Ethernet LAN (RJ-45) ports	1
Multichannel audio output type	RCA
Connectivity technology	Wired
AM antenna ports quantity	0
Speakers connectivity type	Binding post
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPS
Wi-Fi	No
Supported radio bands	FM
Internet radio services supported	vTuner
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	iPhone
Number of products included	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	390 W
Cables included	AC