MAIN
ZONE2
SLEEP
Sleep timer function
You can have the power automatically switched to standby once a set
time has elapsed. This is convenient for viewing and listening while going
to sleep.
The sleep timer function can be set for each zone.
Using the sleep timer
1
Press MAIN or ZONE2 to switch the zone mode.
The button for the selected zone is lit.
2
Press SLEEP and display the time you want to set.
•The SLEEP indicator on the display lights.
•You can set the sleep timer in the range from 10 to 120 minutes
in steps of 10 minutes.
2 To cancel the sleep timer
Press SLEEP to set “O”.
The SLEEP indicator on the display turns o.
%
•The sleep timer is also cancelled when this unit is set to the standby mode or the
MAIN ZONE or ZONE2 power is turned o.
NOTE
•The sleep timer function cannot turn o the power of devices connected to this
unit. To turn o the power of those connected devices, set up sleep timers on the
connected devices themselves.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
