Listening to FM broadcasts
1
Press TUNER to switch the input source to “TUNER”.
GTV ScreenH
TUNE+/-
STEREO
AUTO
CH / OPTION
TUNER
FM 87.50MHz
Now Playing
Tune Preset Option
CH 1
GDisplay of this unitH
01 FM 87.50MHz
2
Press TUNE + or TUNE – to select the station you want
to hear.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
%
•The modes for receiving FM broadcasts consists of “Auto” mode that automatically
searches available broadcast stations and “Manual” mode that lets you tune in
using buttons to change the frequency. The default setting is “Auto”. You can also
use “Direct Tune” to tune in by entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is not good. If
this is the case, then use the “Manual” mode or “Direct Tune” to tune in.
Operation buttons Function
TUNE +, – Tuning (up/down)
CH/PAGE df
Preset channel selection
FAVORITE STATION
1 – 3
Call up FAVORITE STATION
(Press and hold)
Registering to FAVORITE STATION
To Next Page
Loading...
Need help?
General
Weight and Dimensions
