Denon AVR-X2000 - Preset Name; Specify a Name for the Preset Broadcast Station (Preset Name)

58
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Tuning in to stations and presetting them
automatically (Auto Preset Memory)
A maximum of 56 radio stations can be automatically preset.
1
Press OPTION when the input source is “TUNER”.
The option menu screen is displayed.
2
Use ui to select “Auto Preset Memory”, then press
ENTER.
3
Press ENTER.
The unit starts to tune in to radio stations automatically and preset
them.
•When presetting is completed, “Completed” is displayed for
about 5 seconds and the option menu screen turns o.
%
•The preset memory is overwritten.
Specify a name for the preset broadcast
station (Preset Name)
You can set the name to the preset broadcast station or change it.
Up to eight characters can be input.
1
Press OPTION when the input source is “TUNER”.
The option menu screen is displayed.
2
Use ui to select “Preset Name”, then press ENTER.
The Preset Name screen is displayed.
3
Use o p to select the group of the broadcast station you
want to name.
4
Use ui to select the broadcast station you want to
name, then press ENTER.
5
Use ui to select a name label, then press ENTER.
The screen that lets you edit the preset name is displayed.
•If you select “Set Defaults”, then the unit returns to displaying
the frequency.
6
Enter the characters, then press “OK”.
•For character input, see page121.