Adjusting the master volume
1
Use VOLUME df to adjust the volume.
•The variable range diers according to the input signal and channel
level setting.
%
•You can also adjust the master volume by turning MASTER VOLUME on the main
unit.
Turning o the sound temporarily
1
Press MUTE :.
•“MUTE” indicator on the display flashes.
•: appears on the TV screen.
%
•The sound is reduced to the level set at “Mute Level” (vpage127).
•To cancel, press MUTE
: again. Muting can also be cancelled by adjusting the
master volume.
Playing a DVD player/Blu-ray Disc player
The following describes the procedure for playing DVD player/Blu-ray Disc
player.
1
Prepare for playback.
q
Turn on the power of the TV, subwoofer and player.
w Change the TV input to the input of this unit.
2
Press POWER X to turn on power to the unit.
3
Press DVD or Blu-ray to switch an input source for a
player used for playback.
4
Play the DVD player or Blu-ray Disc player.
To Next Page
Loading...
